DTC Troubleshooting: 86-1x, 86-2x
|DTC 86-1x (86-10 to 86-19, 86-1A to 86-1F):||Faulty OPDS Seat-back Sensor|
|1.||Erase the DTC memory.|
|2.||Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.|
Does the SRS indicator stay on?
YES - Go to 3.
NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures.
|3.||Check the connection at the OPDS sensor harness connector and the OPDS unit connector.|
Are the connections OK?
YES - Go to 4.
NO - Reconnect the OPDS sensor harness connector, and clear the DTC.n
|4.||Replace the OPDS sensor/seat-back foam, and initialize the OPDS.|
|5.||Erase the DTC memory, then check for DTC 86-1x or 86-2x.|
Is DTC 86-1x or 86-2x indicated?
YES - Replace the OPDS unit.n
NO - The system is OK.n