DTC Troubleshooting: 65

DTC 65:  Brake Fluid Level

1.Check the brake fluid level.

Is the level correct?

YES - Go to 2.

NO - Refill the brake fluid, and recheck.n

2.Check for short in the GRN/RED wire between the VSA control unit and the brake fluid level switch. If OK, check the brake fluid level switch.

Is the switch OK?

YES - Check for loose terminals in the VSA control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit, and recheck.n

NO - Replace the  brake fluid level switch.n