A/T Clutch Pressure Control Solenoid Valve A Replacement

1.Remove the air cleaner housing.

2.Disconnect A/T clutch pressure control solenoid valve A connector.

3.Remove the mounting bolts and the A/T clutch pressure control solenoid valve A.

 

4.Remove the ATF pipe (B), ATF joint pipes (C), O-rings (D), and gasket (E).

5.Install the new gasket on the transmission housing, and install the ATF pipe and ATF joint pipes.

6.Install the new O-rings over the ATF joint pipes.

7.Install the A/T clutch pressure control solenoid valve A.

8.Check the A/T clutch pressure control solenoid valve A connector for rust, dirt, or oil, then connect the connector securely.

9.Install the air cleaner housing.