A/T Shift Solenoid Valve Removal and Installation

NOTE:

1.Remove the shift solenoid valves by holding the solenoid valve body.

2.Install new O-rings (F) on each shift solenoid valves.

NOTE: The new shift solenoid valve is equipped with new O-rings. If you install a new shift solenoid valve, there is no need to replace its O-rings.

 

3.Install shift solenoid valve D by holding the shift solenoid valve body; be sure to install mounting bracket contacts the servo body.

4.Install shift solenoid valve A by holding the shift solenoid valve body; be sure to install mounting bracket contacts the bracket on shift solenoid valve D.

5.Install shift solenoid valve E by holding the shift solenoid valve body; be sure to install mounting bracket contacts the servo body.

6.Install shift solenoid valve B by holding the shift solenoid valve body; be sure to install mounting bracket contacts the bracket on shift solenoid valve E.

7.Install shift solenoid valve C by holding the shift solenoid valve body; be sure to install mounting bracket contacts the servo body.