A/T Interlock System - Reverse Lock System Circuit Troubleshooting

1.Check whether DTC P0705 or P0706 is indicated.

Is either DTC indicated?

YES - Perform the troubleshooting for the indicated code.

NO - Go to 2.

2.Turn the ignition switch OFF.

3.Shift the shift lever to the P position while pushing the shift lock release.

4.Turn the ignition switch ON (II).

5.Press the brake pedal and release the accelerator, shift the shift lever out of the P position, and check that the shift lock solenoid operates.

Does the shift lock solenoid work properly?

YES - Check the reverse lock (shift lock mechanism). If the mechanism does not work, repair or replace the shift lever assembly.n

NO - Do the Shift Lock System Circuit Troubleshooting.n