CMP Pulse Plate Replacement

1.Remove the camshaft position (CMP) sensor.

2.Remove the cylinder head cover.

3.Hold the intake camshaft with an open-end wrench, then loosen the CMP pulse plate mounting bolt.


4.Remove the CMP pulse plate.


5.Install the CMP pulse plate and bolt.

6.Hold the intake camshaft with an open -end wrench, then tighten the bolt.

Specified Torque: 
12 N·m (1.2 kgf·m, 8.7 lbf·ft) 

7.Install the cylinder head cover.

8.Install the CMP sensor.