Fuel Filter Water Bleeding

1.Place a suitable container under the fuel filter to catch up the water.

2.Connect the hose (A) to water screw (B).

 

3.Loosen the water screw, and bleed the water from the fuel filter.

4.Tighten the water screw securely, and disconnect the hose.

5.Start the engine, and then check the water in diesel filter warning indicator (A).

  • If the water in diesel filter warning indicator is on, go to 6.
  • If the water in diesel filter warning indicator is not on, fuel filter water bleeding is complete.

 

6.Disconnect the fuel filter water level switch 2P connector, and then recheck the water in diesel filter warning indicator.


7.Bleed the fuel system.