Brake Booster Replacement

NOTE: LHD type is shown, RHD type is symmetrical.

1.Remove the master cylinder.

2.Remove the air cleaner assembly (A).

 

3.Remove the clutch reservoir bracket (A), and move it aside. Do not disconnect the clutch hose from the reservoir.

 

4.Disconnect the vacuum hose (A) from the brake booster (B).

 

5.Release the master cylinder brake lines (A) on the brake line clip (B).

 

6.Remove the clip (A) and the joint pin (B), and disconnect the yoke from the brake pedal.

 

7.Remove the brake booster mounting nuts (C).

8.Remove the brake booster (A) from the engine compartment.



  • Be careful not to damage the booster surfaces and threads of the booster stud bolts.
  • Be careful not to bent or damage the brake lines.

 

9.Install the brake booster in the reverse order of removal, and note these items: