M/T Clutch Housing Countershaft Bearing Replacement

Special Tools Required
Adjustable bearing puller, 45-75 mm (  07YAC-0010100)
 

Attachment, 72 x 75 mm (  07746-0010600)
 
Driver (  07749-0010000)
 


1.Remove the bearing set plate (A) from the clutch housing (B).

 

2.Remove the needle bearing (A) from the clutch housing (B) using the special tool and a commercially available 3/8''-16 slide hammer (C).

 

3.Install the new needle bearing using the special tools.

 

4.Install the bearing set plate (A) with the bolts (B).