M/T Select Arm Clearance Inspection

1. Measure the clearance between the select arm (A) and interlock (B) with a feeler gauge (C). If the clearance is more than the service limit, go to 2.

Standard: 0.05-0.25 mm (0.002-0.010 in.) 
Service Limit: 0.5 mm (0.020 in.) 

 

2.Measure the width of the select arm.

  • If the width is not within the standard, replace the select arm.
  • If the width is within the standard, replace the interlock.

Standard: 12.9-13.0 mm (0.50-0.51 in.)