M/T Shift Arm Clearance Inspection

1.Measure the clearance between the shift arm (A) and shift piece (B) with a feeler gauge (C). If the clearance is more than the service limit, go to 2.

Standard: 0.05-0.25 mm (0.002-0.010 in.) 
Service Limit: 0.5 mm (0.020 in.) 

 

2.Measure the width of the shift arm.

  • If the width is not within the standard, replace the shift arm.
  • If the width is within the standard, replace the shift piece.

Standard: 13.9-14.0 mm (0.54-0.55 in.)