Transfer Housing Bearing Outer Race Replacement
Special Tools Required
Installer shaft, 14 x 165 mm ( 07JAF-SJ80110)
Bearing installer attachment ( 07KAF-PS30120)
Bearing installer attachment ( 07LAF-PZ70110)
Attachment, 52 x 55 mm ( 07746-0010400)
Driver ( 07749-0010000)
- Coat all parts with MTF during reassembly.
- Replace the tapered roller bearing and the bearing outer race as a set if either part is replaced.
|1.||Remove the tapered roller bearing outer race (A) from transfer housing (B) by heating the cover to almost 100 °C (212 °F) using a heat gun (C). Do not heat the cover over 100 °C (212 °F).|
Bearing Outer Race Locations
|2.||Install the 57 mm tapered roller bearing outer race using the special tools.|
|3.||Install the 62 mm tapered roller bearing outer race and 50 mm tapered roller bearing outer race using the special tools.|