Starter Solenoid Test - Except KK/KN/KM/KP/KQ/KT/KX/KW/KU (RVI-I, RVSI-I)

Except KK, KN, KM, KP, KQ, KT, KX, KW, KU (RVI-I, RVSI-I models) Models


1.Check the hold-in coil for continuity between the S terminal (A) and the armature housing (ground). There should be continuity.

  • If there is continuity, go to 2.
  • If there is no continuity, replace the solenoid.

 

2.Check the pull-in coil for continuity between the S terminal (A) and M terminal (B). There should be continuity.

  • If there is continuity, the solenoid is OK.
  • If there is no continuity, replace the solenoid.