Side Curtain Airbag Replacement

Removal


NOTE:

1.Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.

2.Remove the headliner.

3.Disconnect the side curtain airbag 2P connector (A) from the floor wire harness.

 

4.Remove the mounting bolts (A) from the bracket.

 

Installation


NOTE:

1.Place the new side curtain airbag assembly on the side of the roof. Tighten the side curtain airbag mounting bolts (A).

 

2.Connect the side curtain airbag 2P connector (A) to the floor wire harness.

 

3.Reconnect the battery negative cable.

4.Connect the HDS and clear the DTCs.

5.After installing the side curtain airbag, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.

6.Install all removed parts.

7.Confirm proper headliner/pillar trim overlap.