Interior Trim Removal/Installation - Pillar Area: Without Side Curtain Airbags

Front Pillar Trim - Without Side Curtain Airbags


NOTE:

1.Pull out the front door opening trim (A) as needed. Pull the upper portion of the front pillar trim (B) back by hand to detach the clips, and pull the trim up, then remove it from the dashboard (C).

 

2.Install the trim in the reverse order of removal, and note these items:

  • Replace any damaged clips.
  • Push the clips into place securely.

Center Pillar Trim - Without Side Curtain Airbags


NOTE:

1.Remove these items:


2.Remove the front seat belt lower anchor bolt.

3.Remove the center pillar lower trim (A).

-1 Detach the lower clips by pulling the bottom of the trim back by hand.
-2 While pull back both top edge of the trim, pull it up.

 

4.Remove the upper anchor cover, and remove the upper anchor bolt.

5.Pull out the front door opening trim (A) and the rear door opening trim (B) as needed. Release the lower hook (C) and upper clip, then remove the center pillar upper trim (D).

 

6.Install the trim in the reverse order of removal, and note these items:

  • Replace any damaged clips.
  • Push the clips into place securely.
  • Apply liquid thread lock to the front seat belt upper anchor bolt before reinstallation.
  • Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.

Quarter Pillar Trim - Without Side Curtain Airbags


NOTE:

1.Remove these items:


2.Remove the quarter pillar trim (A).

-1 Pull out the rear door opening trim (B) as needed.
-2 Detach the lower clips by pulling the bottom of the trim.
-3 Detach the upper clips, then remove it.

 

3.Install the trim in the reverse order of removal, and note these items:

  • Replace any damaged clips.
  • Push the clip portions into place securely.
  • Apply liquid thread lock to the rear seat belt upper anchor bolt before reinstallation.
  • Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
  • When installing the side trim panel, make sure the seat belt is not pinched.

Rear Pillar Trim - Without Side Curtain Airbags


NOTE:

1.Remove these items:


2.Pull the rear pillar trim (A) back by hand to detach the clips (B, C), then remove it.

 

3.Install the trim in the reverse order of removal, and note these items:

  • Replace any damaged clips.
  • Push the clips into place securely.