Master Cylinder Disassembly
|1.||Remove the circlip (A) while pushing in the secondary piston (B).|
|2.||Remove the reservoir (A).|
|3.||Remove the stop pin (B) while pushing in the secondary piston (C).|
|4.||Remove the secondary piston (A) and primary piston (B).|
|5.||Remove the reservoir seal (A) from the reservoir cap (B).|
|6.||Remove the strainer(C) and grommets (D) from the reservoir (E).|
NOTE: When reservoir and master cylinder body are separated, replace the grommets with new ones.