Rear Seat Cushion Disassembly/ReassemblyNOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- The left seat cushion is shown, the right seat cushion is similar.
|1.||Remove the rear seat cushion.|
|2.||Remove the screws, remove the foot cover (A) while pulling both pin portions (B) outward.|
|3.||Remove the under cover cap (A).|
|4.||Remove all of the screws and the net set trim (A). Release the edge of the seat-back cover (B) all the way around from the under cover (C).|
|5.||Remove the under cover (A).|
|6.||Release the hook strips (A) of the seat cushion cover (B) from the seat cushion frame (C).|
|7.||Remove the screw (A) and detach the clip (B), then remove the recline cover (C).|
|8.||Separate the seat cushion frame (A) and seat cushion cover/pad (B).|
|9.||Remove the foot pipe (A) from the seat cushion frame (B):|
|10.||Reinstall the seat cushion in the reverse order of disassembly, and note these items:|