Rear Seat-back Disassembly/ReassemblyNOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
|1.||Remove the seat-back.|
|2.||Remove these items:|
|3.||Remove the screw, then remove the latch cover (A).|
|4.||Remove the screws (A) and detach the clips (B), then remove the striker hole cover (C).|
|5.||Release the hook strip (A), and unzip the seat-back cover. Pull back the cover (B), then release the hooks (C) from the seat-back frame (D). The left seat-back is shown, the right seat-back is similar.|
|6.||Release the hook strips (A) from the seat-back frame (B), then remove the frame cover (C).|
|7.||Pull out the seat-back pad (A) from the frame (B), then pull out the headrest guides (C) while pinching the end of the guides, and remove them. The right seat-back with middle headrest is shown, the right seat-back without middle headrest and the left seat-back are similar.|
|8.||Remove the seat-back cover/pad (A) from the seat-back frame.|
|9.||Remove the bolts, then remove the seat-back latch (A) from the seat-back frame (B), and release the pivot pins (C) of the latch lever (D) from the seat-back frame.|
|10.||Release the push nut (A) from the seat-back hinge (B), then remove the pivot pin (C), pivot collars (D), and hinge from the seat-back frame (E). The inside hinge of each seat-back frame is shown. The outside hinges of them are symmetrical.|
|11.||Reassemble the seat-back in the reverse order of disassembly, and note these items:|