M/T Shift Forks Clearance InspectionNOTE: The synchro sleeve and synchro hub should be replaced as a set.
|1.||Measure the clearance between each shift fork (A) and its matching synchro sleeve (B). If the clearance exceeds the service limit, go to 2.|
|2.||Measure the thickness of the shift fork (A) fingers.|
|3.||Measure the clearance between the shift forks (A) and the shift arm (B). If the clearance exceeds the service limit, go to 4.|
|4.||Measure the width of the shift arm (A).|