DTC Troubleshooting: 67

DTC: 67  Torque Sensor I/F Circuit

1.Clear the DTC.

2.Start the engine.

3.Turn the steering wheel from lock to lock several time, and wait 10 seconds or more.

Does the EPS indicator come on?

YES - Go to 4.

NO - The system is OK at this time.n

4.Stop the engine, and verify the DTC.

Is DTC 67 indicated?

YES - Check for loose EPS control unit connectors. If necessary, substitute a known-good  EPS control unit and recheck.n

NO - Perform the appropriate troubleshooting for the code indicated.n