Power Relays Test - Normally-open Type AUse this chart to identify the type of relay, then do the test listed for it.
|A/C compressor clutch relay||Normally-open type A|
|A/T reverse relay|
|Blower motor relay|
|Condensor fan relay|
|Left HID headlight relay|
|Right HID headlight relay|
|Left activation indicator relay|
|Right activation indicator relay|
|PGM-FI main relay 1|
|PGM-FI main relay 2|
|Power mirror defogger relay|
|Power window relay|
|Radiator fan relay|
|Starter cut relay|
|EPS motor relay||Normally-open type B|
|Power door lock/fuel lid lock relay||Five terminal type|
|Power door unlock/fuel lid unlock relay|
|Sunroof open relay|
|Sunroof close relay|
|Left super locking relay|
|Right super locking relay|
Normally-open type A:
Check for continuity between the terminals.
- There should be continuity between the No. 1 and No. 2 terminals when power and ground are connected to the No. 3 and No. 4 terminals.
- There should be no continuity between the No. 1 and No. 2 terminals when power is disconnected.
· PGM-FI main relay 1
· PGM-FI main relay 2
· Activation indicator relays
· HID headlight relays