Interior Trim Removal/Installation - Trunk Floor and Side Area


  • Put on gloves to protect your hands.
  • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  • Take care not to bend or scratch the trim and panels.

Remove the trim as shown.

Install the trim in the reverse order of removal, and note these items:

  • Replace any damaged clips.
  • Make sure the trunk compartment light connector is plugged in properly.
  • When installing the rear side trim panel, make sure there are no pinches in the belt.
  • Before installing the anchor bolt, make sure there are no twists or kinks in the belt.