Blower Unit Removal and InstallationNOTE: LHD type is shown, RHD type is symmetrical.
|1.||Remove the passenger's dashboard under cover and the inner glove box.|
|2.||Disconnect the recirculation control cable from the recirculation control linkage.|
|3.||Disconnect the connector (A) from the blower motor, then remove the mounting bolt, the self-tapping screws, and the bracket (B).|
|4.||Remove the clip (A). Remove the mounting bolt, the screws, and the bracket (B). Remove the connector clip (C). Remove the self-tapping screws and the blower unit (D).|
|5.||Install the unit in the reverse order of removal. Make sure that there is no air leakage.|