Rear Door Latch Replacement

NOTE: Put on gloves to protect your hands.

1.Raise the glass fully.

2.Remove these items:

3.Disconnect the lock rod (A) from the lock crank (B).


4.With Super Locking: Remove the bolts, then remove the harness protector (A).


5.Disconnect (and detach) the actuator connector (A). Remove the screws securing the latch (B). Take care not to bend the inner handle rod (C) and lock rod (D).


6.Disconnect the inner handle rod (A) and lock rod (B) from the latch (C).


7.Remove the bolts (A, B) securing the rear lower channel (C), then remove the collar (D).


8.Move the latch (A) through the gap between the rear lower channel (B) and door, then remove it.


9.Install the latch in the reverse order of removal, and note these items:

  • Make sure the connector is plugged in properly, and each rod is connected securely.
  • Make sure the door locks and opens properly.