Instrument Visor Removal/InstallationNOTE:
- Do not pry the visor or panel surface with a flat-tip screwdriver to prevent damage.
- Take care not to scratch the dashboard and related parts.
- LHD is shown, RHD is symmetrical.
|1.||Tilt the steering column down.|
|2.||Remove the instrument panel (A):|
|3.||Remove the instrument lower visor (A):|
|4.||Remove the screws, then remove the instrument upper visor (A).|
|5.||Install the visors and panel in the reverse order of removal. Push the clip portions into place securely.|