FIT/JAZZ 2G GE year 2009-2012

• Twitter
• Facebook
• Snapchat
• Instagram
• Medium

Maintenance Schedule for Normal Conditions - Australia and New Zealand Models

Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.

Service at the indicated distance or time whichever comes first.	km x 1,000	20	40	60	80	100	120	140	160	180	200
	miles x 1,000	12.5	25.0	37.5	50.0	62.5	75.0	87.5	100.0	112.5	125.0
	months	12	24	36	48	60	72	84	96	108	120
Replace engine oil		Every 10,000 km (6,250 miles) or 1 year
Replace engine oil filter		l	l	l	l	l	l	l	l	l	l
Replace air cleaner element			l		l		l		l		l
Inspect the valve clearance Check valve clearance			l		l		l		l		l
Replace fuel filter					l				l
Replace spark plugs	L13A1 engine (Normal type)		l		l		l		l		l
	L15A1 engine (Iridium type)					l					l
Inspect and adjust drive belts Check for cracks, damage. Check deflection and tension.			l		l		l		l		l
Inspect idle speed						l					l
Replace engine coolant Use Honda All Season Antifreeze/Coolant Type 2		At 200,000 km (120,000 miles) or 10 years, then replace every 100,000 km (60,000 miles) or 5 years
Replace transmission fluid (MTF) Use Honda MTF (Manual Transmission Fluid)							l
Replace CVT fluid (ATF) Use Honda ATF-Z1					l			l			l
Inspect front and rear brakes Check the brake pad and disc thickness. Check for damage and cracks brake pad, brake disc. Check the wheel cylinder for leaks. Check the brake linings for cracking, glazing, wear, and contamination. Check the calipers for damage, leaks, and tightness.		l	l	l	l	l	l	l	l	l	l
Replace brake fluid Use only DOT 3 or DOT 4 brake fluid (We recommend Honda Brake Fluid). Check that brake fluid level between the upper and lower marks on the reservoir		Every 3 years

Service at the indicated distance or time whichever comes first.	km x 1,000	20	40	60	80	100	120	140	160	180	200
	miles x 1,000	12.5	25.0	37.5	50.0	62.5	75.0	87.5	100.0	112.5	125.0
	months	12	24	36	48	60	72	84	96	108	120
Check parking brake adjustment Check the parking brake operation		l	l		l		l		l		l
Check lights alignment Check the position of the headlights		l	l	l	l	l	l	l	l	l	l
Test drive (Check for noise, road stability, vibrations, and dashboard operations)		l	l	l	l	l	l	l	l	l	l
Rotate tyres (Check tyre inflation and condition at least once per month)		Every 10,000 km (6,250 miles) or 1 year
Visually inspect the following items Check for correct installation and position, check for cracks, deterioration, rust, and leaks. Check tightness of screws, nuts, and joints. If necessary, retighten.
Tie rod ends, steering gearbox, and boots Check rack grease and steering linkage. Check the boot for damage and leaking grease.		l	l	l	l	l	l	l	l	l	l
Suspension components Check the bolts for tightness. Check all dust cover for deterioration and damage.
Driveshaft boots Check boot and boot band for cracks. Check rack grease.
Brake hoses and lines (including ABS) Check the master cylinder, proportioning control valve, and ABS modular for damage and leakage
All fluid levels and condition of fluid Engine coolant. MTF. ATF. Brake fluid. Windshield washer.
Exhaust system Check the catalytic converter heat shield, exhaust pipe, and muffler for damage. leaks and tightness
Fuel lines and connections Check fuel lines for loose connections, cracks, and deterioration. Retighten loose connections and replace any damaged parts.