Ignition Coil Troubleshooting - L15A1

L15A1 Engine

1.Check the diagnostic trouble code (DTC).

Is DTC indicated?

YES - Perform the troubleshooting for the indicated DTC.n

NO - Go to 2.

2.Remove the spark plugs from the cylinder head, and inspect the spark plug.

Is the spark plug OK?

YES - Go to 3.

NO - Replace the spark plug.n

3.Remove the PGM-FI main relay 2.

4.Start the engine and let it run until it stalls.

5.Install the spark plugs on the ignition coils.

6.Connect the ignition coil connector, and connect the spark plug on the ground.

7.With the shift lever in neutral, turn the ignition switch to start (III), and check the spark.

Does the plug spark?

YES - Ignition coil is OK.n

NO - Go to 7.

8.Substitute a known-good ignition coil, and recheck the spark.

Does the plug spark?

YES - Replace the original ignition coil.n

NO - Check for a blown No. 24 (15 A) fuse in the under-dash fuse/relay box. If the fuse is OK, repair open in the wire between the under-dash fuse/relay box and ignition coil.n