Honda CIVIC 10G 2016 Dashboard Center Console Page 1

Dashboard Component Location Index
Dashboard Component Location Index 4613 http://techinfo.honda.com/rjanisis/pubs/sm/1/2/Contents/enu/61TBAD/...
1 of 1 12/20/2018 5:02 AM
cardiagn.com

Contents Summary of Dashboard Center Console

  • Page 1Dashboard Component Location Index cardiagn.com
  • Page 2Consoles Component Location Index cardiagn.com
  • Page 3Center Console Armrest Removal and Installation Center Console Center Armrest 1. Center Console Rear Trim - Remove 2. Center Console Center Armrest - Remove Without damper 1. Remove these items: Clips (A) (without damper) Hinge bushing (B) (without damper) Hinge pin (C) (without damper) Torque hinge
  • Page 43. All Removed Parts - Install 1. Install the parts in the reverse order of removal. Center Console Side Armrest 1. Center Console Side Armrest - Remove cardiagn.com 2. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 5Center Console Lower Tray Removal and Installation 1. Center Console Switch Panel - Remove 2. Center Console Lower Tray - Remove 1. Remove the center console lower tray (A). 2. Disconnect the connector (B). 3. For some models: Remove the harness clip (C). cardiagn.com 3. All Removed Parts - Install
  • Page 6Center Console Panel Removal and Installation 1. Climate Control Panel - Remove 2. Center Console Shift Panel - Remove 3. Wireless Charger - Remove (For Some Models) 4. Center Console Panel - Remove 1. CVT: Move the shifter (A) to L position. cardiagn.com 2. CVT: Remove the clips (B).
  • Page 73. Remove the center console panel (A). cardiagn.com 5. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 8Center Console Rear Trim Removal and Installation 1. Center Console Rear Trim - Remove 1. Remove the center console rear trim (A). 2. With rear seat heater: Disconnect the connectors (B). 2. All Removed Parts - Install cardiagn.com 1. Install the parts in the reverse order of removal.
  • Page 9Center Console Removal and Installation NOTE: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service. 1. Center Console Rear Trim - Remove (With Keyless Access System) 2. Center Console Lower Tray - Remove 3. Cen
  • Page 102. For some models: Remove the mat (A). 3. Remove bolts (B). cardiagn.com 4. With keyless access system: Disconnect the connector (A). 5. With keyless access system: Remove the harness clip (B).
  • Page 116. Remove the center console (A). 7. With USB port B: Disconnect the connector (B). cardiagn.com 4. Center Console Support Bracket - Remove (M/T) 5. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 12Center Console Shift Panel Disassembly and Reassembly 1. Center Console Shift Panel - Remove 2. Center Console Shift Panel - Disassemble M/T 1. Remove these items: Electric parking brake switch (A) ECON switch (B) M/T or CVT panel (C) M/T or CVT trim (D) M/T or CVT cover (E) cardiagn.com CVT
  • Page 13cardiagn.com 3. All Disassembled Parts - Assemble 1. Assemble the parts in the reverse order of disassembly.
  • Page 14Center Console Shift Panel Removal and Installation 1. Center Console Side Trim - Remove 2. Shift Lever Knob - Remove (M/T) 3. Center Console Shift Panel - Remove 1. Remove the center console shift panel (A). 2. Disconnect the connectors (B). NOTE: The positions and number of connectors vary cardiag
  • Page 15Wear goggles or safety glasses to prevent eye injury. 1. Drill out the rivets (A) with a drill (B). 2. Remove the emblem plate (C). cardiagn.com 5. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 16Center Console Side Trim Removal and Installation 1. Center Console Side Armrest - Remove 2. Center Console Side Trim - Remove NOTE: Remove the clips in the sequence and direction shown. cardiagn.com 3. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 17Center Console Switch Panel Removal and Installation 1. Center Console Panel - Remove 2. Center Console Switch Panel - Remove 1. For some models: Remove the center console lower tray mat (A). 2. Remove the center console switch panel (B). 3. Disconnect the connector (C). 4. With USB port A: Disconne
  • Page 18Center Console Upper Tray Removal and Installation 1. Center Console Shift Panel - Remove 2. Center Console Upper Tray - Remove cardiagn.com 3. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 19Dashboard Center Lower Cover Removal and Installation 1. Center Console - Remove 2. Driver's Dashboard Lower Cover - Remove 3. Glove Box Back Cover - Remove 4. Dashboard Center Lower Cover - Remove 1. Remove the dashboard center lower cover (A). cardiagn.com 2. Disconnect the connector (B). 3. Remov
  • Page 20Dashboard Meter Lower Visor Removal and Installation 1. GPS Antenna - Remove (With Navigation) 2. Driver's Dashboard Side Cover - Remove 3. Driver's Inner Dashboard Trim - Remove - Remove 4. Passenger's Dashboard Trim - Remove 5. Meter Lower Visor - Remove cardiagn.com 1. Adjust the steering column
  • Page 213. Remove the meter lower visor (A). 4. Disconnect the connector (B). cardiagn.com 6. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 22Dashboard Meter Upper Visor Removal and Installation 1. Meter Upper Visor - Remove cardiagn.com 2. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 23Dashboard Removal and Installation NOTE: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service. 1. 12 Volt Battery Terminal - Disconnect NOTE: Wait at least 3 minutes before starting work. 2. Dashboard Center Lo
  • Page 241. Remove the harness clips (A) at the passenger's dashboard trim area. cardiagn.com 2. Adjust the steering column to the full tilt down position, and to the full telescopic out position. 3. Remove the dashboard (A). 4. Remove the harness clips (B). 12.Passenger's Dashboard Frame - Remove
  • Page 25cardiagn.com 13.All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 26Dashboard Side Cover Removal and Installation 1. Driver's Dashboard Lower Cover - Remove (Driver's Dashboard Side Cover) 2. Dashboard Side Cover - Remove Driver's side 1. Remove the dashboard side cover (A). 2. With front passenger's airbag ON/OFF switch: Disconnect the connector (B). cardiagn.com
  • Page 27Passenger's side cardiagn.com 3. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 28Dashboard/Steering Hanger Beam Removal and Installation SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service. NOTE: How to read the torque specifications. 1. 12 Volt Battery Terminal - Disconnect NOTE: Wait at
  • Page 2912.Under-Dash Fuse/Relay Box Bolt - Remove 13.Brake Pedal Position Switch – Remove 14.Dashboard/Steering Hanger Beam - Remove Driver's side 1. Disconnect the connectors (A) at the A-pillar. 2. Remove the harness clip (B). 3. Disconnect the connectors (A) and remove the clips (B). cardiagn.com NOTE:
  • Page 304. Remove the bolts (A) from under the dashboard. Center console area cardiagn.com 5. For some models: Disconnect the connectors (A). 6. Remove the harness clips (B).
  • Page 31cardiagn.co
  • Page 327. Remove the bolts (A) from under the dashboard. cardiagn.com Passenger's side 8. Disconnect the connector (A) at the A-pillar. 9. Remove the harness clip (B).
  • Page 3310. Disconnect the connectors (A). 11. With stereo amplifier: Disconnect the connectors (B), and remove the harness clip (C). cardiagn.com
  • Page 34Passenger's Side 12. Loosen the special bolts (A) until they disengage from the threads on the hanger beam brackets (B), and engage the inside threads of the collar bolts (C). The thread lock on the special bolts makes the special bolts and the collar bolts turn together. 13. Continue to loosen the
  • Page 35Engine Compartment Side Passenger's Side 15. Check that the collar bolts (A) are seated in the fixed space cardiagn.com adjusters (B). NOTE: If either collar bolt was not seated, replace the special bolts.
  • Page 36Engine Compartment Side cardiagn.com
  • Page 37Driver's Side 16. Remove the bolts (A). cardiagn.com 17. Lift up the dashboard/steering hanger beam (A) to release it from the guide pins (B) on the body. 18. Carefully remove the dashboard/steering hanger beam through the front door opening. 15.All Removed Parts - Install Special Bolt Tightening 1.
  • Page 38hand, and then screw them into the space adjuster (C) fully by hand. Do not tighten them with any tools. After setting the dashboard in the body, reinstall all of the mounting bolts but do not tighten them. First tighten the driver's side mounting bolts to the specified torque. Next, tighten the spe
  • Page 39Driver's Dashboard Lower Cover Removal and Installation 1. Driver's Dashboard Lower Cover - Remove 1. Remove the driver's dashboard lower cover (A). 2. Disconnect the connectors (B) and the aspirator hose (C). 3. For some models: Disconnect the connector (D). cardiagn.com 2. Switch Trim - Remove 3.
  • Page 40Driver's Dashboard Switch Panel Removal and Installation 1. Meter Lower Visor - Remove 2. Driver's Dashboard Switch Panel - Remove 1. Remove the driver's dashboard switch panel (A). 2. With keyless access system: Disconnect the connector (B). cardiagn.com 3. All Removed Parts - Install 1. Install th
  • Page 41Driver's Inner Dashboard Trim Removal and Installation 1. Audio Unit - Remove (Without Navigation) 2. Audio-Navigation Unit - Remove (With Navigation) 3. Driver's Inner Dashboard Trim - Remove cardiagn.com 4. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 42Glove Box Back Cover Removal and Installation 1. Glove Box - Remove 2. Passenger's Dashboard Side Cover - Remove 3. Passenger's Dashboard Undercover - Remove 4. Glove Box Back Cover - Remove cardiagn.com 5. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 43Glove Box Removal and Installation 1. Glove Box - Remove cardiagn.com 2. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 44How to Connect the HDS 1. Turn the vehicle to the OFF (LOCK) mode. 2. Connect the HDS to the DLC (A) located under the driver's side of the dashboard. cardiagn.com 3. Turn the vehicle to the ON mode, but do not start the engine. 4. Activate the HDS, then make sure the HDS communicates with the PCM a
  • Page 45Integrated Drive-Mode Switch Removal, Installation, and Test 1. Center Console Shift Panel - Remove 2. Integrated Drive-Mode Switch - Remove Si cardiagn.com Type-R 3. All Removed Parts - Install
  • Page 461. Install the parts in the reverse order of removal. cardiagn.com
  • Page 471. Integrated Drive-Mode Switch - Test (Si) 1. Check the switch according to the table. NOTE: When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED. Note this important operating characteristic; diode bias causes a diode to fully conduct ele
  • Page 48cardiagn.com 2. If the result is not as specified, replace the integrated drive-mode switch (A).
  • Page 49Passenger's Dashboard Trim Removal and Installation 1. Audio Unit - Remove (Without Navigation) 2. Audio-Navigation Unit - Remove (With Navigation) 3. Passenger's Dashboard Trim - Remove cardiagn.com 4. Passenger's Trim/Passenger's Outer Vent - Remove
  • Page 50cardiagn.co
  • Page 515. All Removed Parts - Install 1. Install the parts in the reverse order of removal. cardiagn.com
  • Page 52Passenger's Dashboard Undercover Removal and Installation 1. Passenger's Dashboard Undercover - Remove cardiagn.com 2. All Removed Parts - Install 1. Install the parts in the reverse order of removal.
  • Page 53Under-Dash Fuse/Relay Box Removal and Installation SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service. 1. 12 Volt Battery Terminal - Disconnect 2. Driver's Dashboard Lower Cover - Removal 3. Under-Dash Fuse/R
  • Page 54cardiagn.com 2. Remove the under-dash fuse/relay box (B). 3. Remove the connectors (C). 4. Disconnect the back side connectors (D). 5. Carefully remove the relays by prying under the base of the relay. NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall, not