Honda CIVIC 10G 2016 Engine Exhaust System Page 1

A/F Sensor Removal and Installation
Special Tool Required
Image Description/Tool Number
O2 Sensor Wrench Snap-on S6176 or equivalent, commercially
available
NOTE:
Where icon is shown, click for further information.
1
A/F Sensor Removal and Installation 1960 http://techinfo.honda.com/rjanisis/pubs/sm/1/2/Contents/enu/61TBAD/R...
1 of 3 12/20/2018 8:14 AM
cardiagn.com

Contents Summary of Engine Exhaust System

  • Page 1A/F Sensor Removal and Installation Special Tool Required Image Description/Tool Number O2 Sensor Wrench Snap-on S6176 or equivalent, commercially available cardiagn.com NOTE: Where icon is shown, click for further information. 1
  • Page 2cardiagn.com Detailed information, notes and precautions Torque: N·m (kgf·m, lbf·ft) 1. Connector (A/F Sensor) - Disconnect 2. A/F Sensor - Remove 1. Using a commercially available O2 sensor wrench, remove the A/F sensor.
  • Page 33. All Removed Parts - Install 1. Install the parts in the reverse order of removal. cardiagn.com
  • Page 4A/F Sensor Removal and Installation Special Tool Required Image Description/Tool Number O2 Sensor Wrench Snap-on S6176 or equivalent, commercially available cardiagn.com NOTE: Where icon is shown, click for further information. 1
  • Page 5cardiagn.com Detailed information, notes and precautions Torque: N·m (kgf·m, lbf·ft) 1. Connector (A/F Sensor) - Disconnect 2. A/F Sensor - Remove 1. Using a commercially available O2 sensor wrench, remove the A/F sensor.
  • Page 63. All Removed Parts - Install 1. Install the parts in the reverse order of removal. cardiagn.com
  • Page 7A/F Sensor Removal and Installation Special Tool Required Image Description/Tool Number O2 Sensor Wrench Snap-on S6176 or equivalent, commercially available cardiagn.com NOTE: Where icon is shown, click for further information. 1
  • Page 8Detailed information, notes and precautions Torque: N·m (kgf·m, lbf·ft) cardiagn.com 1. A/F Sensor - Remove
  • Page 91. Using a commercially available O2 sensor wrench, remove the A/F sensor. cardiagn.com 2. All Removed Parts - Install 1. Install the parts in the reverse order of removal. 3. PCM - Fuel Learn (When Replacing)
  • Page 10Exhaust Pipe and Muffler Removal and Installation NOTE: Use new gaskets and new self-locking nuts when reassembling. Before removing exhaust pipe A, remove the heat shield . 1. Exhaust Pipe and Muffler - Remove and Install Item Torque Note A 54 N·m (5.5 kgf·m, 40 lbf·ft) Replace. B 33 N·m (3.4 kgf·m
  • Page 11Center Muffler (5-door): cardiagn.com Center Muffler (2/4-door):
  • Page 123. Heat Shield - Remove and Install cardiagn.com Torque: 9.3 N·m (0.95 kgf·m, 6.9 lbf·ft) Applicable Heat Shield List (Dual Muffler):
  • Page 13cardiagn.com Applicable Heat Shield List (Center Muffler: 5-door):
  • Page 14cardiagn.co
  • Page 15Applicable Heat Shield List (Center Muffler: 2/4-door): cardiagn.com
  • Page 16Exhaust Pipe and Muffler Removal and Installation NOTE: Where icon is shown, click for further information. Although a numbered sequence is shown, exhaust pipe A and the muffler are two separate components. If removal or replacement of one of the components is needed, it is not necessary to remove t
  • Page 17cardiagn.com Detailed information, notes, and precautions Torque: N·m (kgf·m, lbf·ft) Replace 1. Engine Undercover - Remove NOTE: Remove the necessary part(s).
  • Page 18cardiagn.co
  • Page 192. Rear Inner Fender - Remove NOTE: When removing the muffler, do this procedure. Remove the appropriate portion of the rear inner fender. 3. Exhaust Pipe A - Remove 4. Muffler - Remove 5. Heat Shield - Remove 6. All Removed Parts - Install cardiagn.com 1. Install the parts in the reverse order of r
  • Page 20Exhaust Pipe and Muffler Removal and Installation NOTE: Use new gaskets and new self-locking nuts when reassembling. Before removing exhaust pipe A, remove the heat shield . 1. Exhaust Pipe and Muffler - Remove and Install Item Torque Note A 33 N·m (3.4 kgf·m, 24 lbf·ft) Replace. B 54 N·m (5.5 kgf·m
  • Page 213. Heat Shield - Remove and Install cardiagn.com
  • Page 22Torque: 9.3 N·m (0.95 kgf·m, 6.9 lbf·ft) Applicable Heat Shield List: cardiagn.com