Press the two buttons (Item 1) [Figure 50-31-6] & [Figure 50-31-7] and lift the seat cushion. Remove the cushion (Item 2) [Figure 50-31-7] from the…

Raise the operator cab. (See Raising The Operator Cab on Page 10-30-1.) Remove the operator seat. (See Removal And Installation on Page 50-31-1.) Remove the…

Raise the operator cab. (See Raising The Operator Cab on Page 10-30-1.) Remove the four seat mounting nuts (Item 1) [Figure 50-31-1] and washers from…

Raise the operator cab. (See Raising The Operator Cab on Page 10-30-1.) Locate the seat belt bolts under seat pan insulation (Items 1 & 2)…

Raise the operator cab. (See Raising The Operator Cab on Page 10-30-1.) Remove the four seat mounting nuts (Item 1) [Figure 50-30-1] and washers from…

Remove the operator cab gas cylinder(s). (See Gas Cylinder Removal And Installation on Page 50-20-1.) Remove the heater unit from the cab (if equipped). (See…

Remove the clevis (Item 1) and washer (Item 2) [Figure 50-20-8] from the end of the gas cylinder. Remove the gas cylinder from the outer…

Remove the operator cab stop (Item 1) (both sides) [Figure 50-20-1]. Remove the cab nut and hold down plate (Item 1) [Figure 50-20-2] (both sides).…

Turn the bolt (Item 1) [Figure 50-10-11] & [Figure 50-10-12] out of the clevis. Assembly: Apply LOCTITE #242 adhesive to the bolt threads. Adjust the…

Assemble the parts as shown for the left side of the seat bar pivot assembly [Figure 50-10-7] & [Figure 50-10-8]. Seat Bar Mount (Item 1)…