Stop the engine and open the tailgate. (See Opening And Closing on Page 10-50-1.) Remove the alternator belt. (See Belt Replacement on Page 50-30-1.) Remove…
The fan belt is a special maintenance free type that is pretensioned over the pulleys. This belt eliminates the need for a tensioning device and…
The recirculation filter and fresh air filter must be cleaned regularly. (See Cleaning And Maintenance on Page 10-90-1.) The recirculation filter is located to the…
In servicing A/C and heater systems you will be exposed to high pressures, temperatures and several chemical hazards. Moving belts and pulleys are normal shop…
Compressor: The compressor (Item 1) [Figure 70-10-1] is the pump that circulates the refrigerant throughout the system. It raises the pressure of the refrigerant for…
In an air conditioning system the refrigerant is circulated under pressure through five major components in a closed circuit. At these five points in the…
The ring gear on the flywheel is an interference fit. Heat the ring gear enough to expand it and hit it with a hammer evenly…
Remove the six bolts (Item 1) [Figure 60-110-7] from the flywheel. Installation: Apply Loctite 242TM to the bolts. Tighten the bolts to 113 – 122…
Open the tailgate. Remove the counterweight. (See Removal And Installation on Page 40-90-1.) Drain the hydraulic reservoir. (See Removing And Replacing Hydraulic Fluid on Page…