When installing the coupler, maintain 45,7 mm (1.80 in) over all length from the pump housing to the coupler edge [Figure 20-50-30].
Remove Counterweight. (See Removal And Installation on Page 40-90-1.) Drain the hydraulic reservoir. (See Removing And Replacing Hydraulic Fluid on Page 10-130-5.) Mark and remove…
The testing of the piston pump must be done in the following order: Pump Margin Pressure Adjustment Main Relief Valve Adjustment Torque Limiter Adjustment Direct…
(Please review pump procedure as illustrated in “Pump Testing”. (See Pump Testing on Page 20-50-3.) The outline listed below, gives the five adjustments for setting…
Remove the main relief valve (Item 1) [Figure 20-40-105]. Installation: Tighten the main relief valve to 69 – 78 N•m (51 – 58 ft-lb) torque.…
Remove the plug (Item 1) [Figure 20-40-99]. Installation: Tighten the plug to 69 – 78 N•m (51 – 58 ft-lb) torque. Remove the spring (Item…
Remove the plug (Item 1) [Figure 20-40-83]. Installation: Tighten the plug to 69 – 78 N•m (51 – 58 ft-lb) torque. Remove the spring (Item…
Remove the plug (Item 1) [Figure 20-40-78]. Installation: Tighten the plug to 69 – 78 N•m (51 – 58 ft-lb) torque. Remove the spring (Item…
Remove the plug (Item 1) [Figure 20-40-69]. Installation: Tighten the plug to 69 – 78 N•m (51 – 58 ft-lb) torque. Remove the spring (Item…
Remove the plug (Item 1) [Figure 20-40-65]. Installation: Tighten the plug to 69 – 78 N•m (51 – 58 ft-lb) torque. Remove the spring (Item…