1. Sit in operator’s seat. Turn key ON. (Key Switch Panel), press RUN/ENTER button (Keyless Panel), lower seat bar and disengage parking brake. Press the PRESS TO OPERATE LOADER button. Three BICS lights (Items 1, 2 & 3) [PRESS TO OPERATE LOADER, SEAT BAR, AND LIFT & TILT VALVE] on left instrument panel should be ON [Figure 60-100-2].
2. Raise seat bar fully. All four BICS lights (Items 1, 2, 3, and 4) [PRESS TO OPERATE LOADER, SEAT BAR, LIFT & TILT VALVE AND TRACTION*] on left instrument panel should be OFF [Figure 60-100-2].
NOTE: Record what lights are blinking (if any) and the number of light flashes. (See Troubleshooting Chart on Page 60-100-4.)
