BOBCAT S130 – HYDRAULIC CONTROL VALVE (STANDARD) – Plug Removal And Installation

At the top side of the control valve, remove the plug (Item 1) [Figure 20-40-37].

Installation: Always use new O-rings (Item 1) [Figure 20-40-38]. Tighten to 40 ft.-lb. (54 N•m) torque.

At the bottom side of the control valve remove the plug (Item 1) [Figure 20-40-39].

Installation: Always use new O-rings (Item 1) [Figure 20-40-40]. Tighten to 40 ft.-lb. (54 N•m) torque.

Published by Jack