Remove the two bolts and nuts (Item 1) and remove the bracket (Item 2) [Figure 20-100-3].
Remove the straight fitting (Item 1) and 90ยฐ fitting (Item 2) [Figure 20-100-4] from the auxiliary hydraulic interlock valve.
Remove the solenoid nut (Item 1) and coil (Item 2) [Figure 20-100-5].
Assembly: Tighten the nut to 5 ft.-lb. (7 Nโขm) torque
Remove the normally closed solenoid stem (Item 1) [Figure 20-100-6] from the auxiliary hydraulic interlock valve.
Assembly: Tighten the poppet valve to 30-35 ft.-lb. (41-47 Nโขm) torque.
Inspect the O-rings (Item 1) and back-up washers (Item 2) [Figure 20-100-7] for damage. Replace as needed.
