Stop the engine and open the rear door.
Remove the bolt (Item 1) and move the air cleaner indicator (Item 2) [Figure 20-90-1] out of the way.
Disconnect the hose (Item 1) [Figure 20-90-2] from the oil cooler.
Remove the two bolts (Item 2) [Figure 20-90-2].
Disconnect the cooling fan connectors (Item 1) [Figure 20-90-3] from the loader harness.
Remove the four bolts (Item 2) [Figure 20-90-3].
Remove the nut (Item 1) washer (Item 2) and grommet (Item 3) [Figure 20-90-4] to allow movement of the tubelines.
Disconnect the tubeline (Item 1) [Figure 20-90-5] from the oil cooler.
Remove the two bolts (Item 2) [Figure 20-90-5] and remove the oil cooler.
Remove the mounting bolts (Item 1) [Figure 20-90-6] to remove the oil cooler from the assembly.
