Icon Identification Make selection by pressing SELECTION BUTTON opposite the Icon. All new machines with Deluxe Instrumentation arrive at Bobcat Dealerships with the panel in…

1. Display Panel: The Display Panel is where all system setup, monitoring, troubleshooting, and error conditions are displayed. 2. Function Icons: The lower left area…

The right instrument panel shown [Figure 60-50-2] is the Standard Panel. The table below shows the Icons and other components of the Right Standard Panel.…

The left instrument panel is the same for both Standard and the Deluxe Instrument Panels [Figure 1]. The table below shows the DESCRIPTION and FUNCTION…

The following test should be done after reassembling the starter: Clamp the starter in a vise. Using a 12 volt battery and ammeter, connect the…

Inspect the brush cover for discoloration, indication the starter has been overheated. Inspect the pinion teeth for wear and damage. Armature Short-Circuit Test: Use a…

Remove the cable (Item 1) [Figure 60-41-6] from the magnetic switch. Remove the bolts (Item 2) [Figure 60-41-6]. Installation: Tighten the bolts to 63-129 ft.lbs.…

Stop the engine and open the rear door. Remove the negative (-) and positive (+) cables from the battery. Disconnect the ground wire (Item 1)…

The key switch must be in the OFF position. The battery must be at full charge. The cable connections on the battery must be clean…