Open the right side cover. (See Opening And Closing on Page 10-60-1.) The shut-off switch (Item 1) [Figure 50-150-1] is located under the right side…

Turn the excavator start key to the run position, or push the ENTER CODE button on the deluxe instrument panel. [Figure 50-140-3] If a new…

The tools listed will be needed to do the following procedure: Order from Bobcat Parts P/N: 7003031 – Remote Start Tool (Service Tool) Kit Kit…

Tools that will be needed to complete the following steps are: MEL1563 – Remote Start Tool MEL1565 – Service Tool Harness Control MEL1566 – Service…

The motion alarm switch (Item 2) [Figure 50-130-5] is located in the travel control valve located under the floor plate. Remove the floor mat and…

Inspect for damaged or missing motion alarm decal (Item 1) [Figure 50-130-1] (cab machine) or (Item 1) [Figure 50-130-2] (canopy machine). Replace if required. NOTE:…

This excavator may be equipped with a motion alarm system. The motion alarm will sound when the operator moves the travel control levers in either…

Disconnect the wire harness (Item 1) [Figure 50-120-1]. Disconnect the washer hose (Item 1). Remove the nut (Item 2) and wiper arm (Item 3) [Figure…

Remove the console cover. (See Console Cover Removal And Installation on Page 40-50-1.) Disconnect the wire harness (Item 1) [Figure 50-110-1] from the switch. Remove…

Remove the gateway controller (See Gateway Controller Removal and Installation on Page 50-102-1.) Disconnect the wire harness (Item 1). Remove the bolts (Item 2) [Figure…