Open the right side cover. Cut and remove the cable ties (Item 1). Reposition the wire harness (Item 2) [Figure 50-102-1]. Remove the nut (Item…

The gateway controller is the main controller. It provides information to all other controllers. The gateway and auxiliary controllers are located under the right side…

Pull up on the center pin (Item 1) [Figure 50-101-2]. Remove the pin assembly (Item 1) [Figure 50-101-3]. Pull up on the instrument panel (Item…

Remove the console cover. (See Console Cover Removal And Installation on Page 40-50-1.) Mark and disconnect the wire harness from the controller (Item 1) [Figure…

The Deluxe Instrument Panel (if equipped) will display a message (Item 1) [Figure 50-91-6] alerting the operator to service the machine. This message will remain…

Press the Information button (Item 2) [Figure 50-91-5] until the display screen shows the maintenance clock. Press and hold the Information button (Item 2) for…

During machine operation, a 2 beep alarm will sound when there are less than 10 hours until the next planned maintenance. The remaining hours before…

The Maintenance Clock alerts the operator when the next service interval is due. EXAMPLE: The maintenance clock can be set to a 500 hour interval…

This feature allows the owner to unlock the password feature so that a password does not need to be used every time the engine is…