The main relief valve limits the hydraulic system pressure by opening at a certain pressure and allowing the hydraulic oil to flow back to the…
Category: BobCat E35
Clean all parts in solvent and dry with compressed air. Inspect all parts for wear or damage. Replace any worn or damaged parts. Always install…
Clean the outside of the cylinder before disassembly. Use the following tools to disassemble the cylinder: MEL1074 – O-ring Seal Hook MEL1075 – Adjustable Gland…
Fully retract the cylinder and install the pin (Item 1). Install the retainer (Item 2) [Figure 20-28-1] on both sides of the pin. Lower the…
Clean all parts in solvent and dry with compressed air. Inspect all parts for wear or damage. Replace any worn or damaged parts. Always install…
Clean the outside of the angle blade cylinder before disassembly. Use the following tools to disassemble the cylinder: MEL1074 – O-ring Seal Hook MEL1075 –…
Lower the bucket and blade to the ground. With the engine off, turn the key to the ON position, lower the console and move the…
Lower the boom / bucket and blade to the ground. With the engine off, turn the key to the ON position, lower the console and…