Hydraulic Pump

Hydraulic Tractor Troubleshooting

Skip to content
Menu
  • Home
  • Contact Us

Category: BOBCAT S130

BOBCAT S130

BOBCAT S130 – BOBCAT INTERLOCK CONTROL SYSTEM (BICS) – Inspecting The Lift Arm Bypass Control

Posted on October 16, 2023

8. Raise the lift arms 6 feet (2 meters) off the ground. Stop engine. Turn lift arm bypass control knob clockwise 1/4 turn. Pull up…

BOBCAT S130

BOBCAT S130 – BOBCAT INTERLOCK CONTROL SYSTEM (BICS) – Inspecting The Traction Lock (Engine RUNNING)

Posted on October 16, 2023

6. Fasten seat belt, disengage parking brake, press the PRESS TO OPERATE LOADER button and raise seat bar fully. Move steering levers slowly forward and…

BOBCAT S130

BOBCAT S130 – BOBCAT INTERLOCK CONTROL SYSTEM (BICS) – Inspecting The Seat Bar Sensor (Engine RUNNING)

Posted on October 16, 2023

4. Sit in operator’s seat, lower seat bar, engage parking brake and fasten seat belt. 5. Start engine and operate at low idle. Press the…

BOBCAT S130

BOBCAT S130 – BOBCAT INTERLOCK CONTROL SYSTEM (BICS) – Inspecting Deactivation Of The Auxiliary Hydraulics System (Engine STOPPED – Key ON)

Posted on October 16, 2023

3. Sit in operator’s seat, lower seat bar, and press the PRESS TO OPERATE LOADER button. Press the auxiliary hydraulics FLOW button. The auxiliary FLOW…

BOBCAT S130

BOBCAT S130 – BOBCAT INTERLOCK CONTROL SYSTEM (BICS) – Inspecting The BICS Controller (Engine STOPPED – Key ON)

Posted on October 16, 2023

1. Sit in operator’s seat. Turn key ON. (Key Switch Panel), press RUN/ENTER button (Keyless Panel), lower seat bar and disengage parking brake. Press the…

BOBCAT S130

BOBCAT S130 – BOBCAT INTERLOCK CONTROL SYSTEM (BICS) – Description

Posted on October 16, 2023

The Bobcat Interlock Control System is an electronic system that is used to protect the operator. The system consists of the traction lock, seat bar…

BOBCAT S130

BOBCAT S130 – DIAGNOSTICS SERVICE CODES – Service Codes List

Posted on October 16, 2023
BOBCAT S130

BOBCAT S130 – DIAGNOSTICS SERVICE CODES – Description

Posted on October 16, 2023

Press and hold the LIGHTS button (Item 1) for two seconds to view SERVICE CODES in the HOURMETER/ CODE DISPLAY (Item 2) [Figure 60-90-1]. If…

BOBCAT S130

BOBCAT S130 – SPEED SENSORS (SJC) – Removal And Installation

Posted on October 16, 2023

Raise the lift arms and install an approved lift arm support device. (See Installing on Page 10-20-1.) Raise the operator cab. (See Raising on Page…

BOBCAT S130

BOBCAT S130 – SPEED SENSORS (SJC) – Testing

Posted on October 16, 2023

The tools listed will be needed to do the following procedure: MEL1609-Wheel Speed Sensor Test Harness [Figure 60-80-2] MEL1563 or 6689779-Remote Start Tool Multimeter Raise…

Posts pagination

Previous Page Page 1 … Page 11 Page 12 Page 13 … Page 40 Next Page

Recent Posts

  • Hydrostatic Drive Problems and Solutions
  • Negative Displacement Pump Types
  • Parts of a Gear Pump and How It Works
  • Piston Pump Components and Basics
  • Principle of Gear Pump

Categories

  • BobCat 753
  • BobCat E35
  • BOBCAT S130
  • BobCat S70
  • Creation and Control of Fluid Flow
  • Hydraulic Actuators
  • Hydraulic Basics
  • Hydraulic Pressure Control
  • Hydraulic Pumps and Pressure Regulation
  • Hydrostatic Transmissions
  • Pump
  • Rotary Actuator
  • Servo Valves
  • Troubleshooting
© Copyright 2024 – Hydraulic Pump
Wisteria Theme by WPFriendship ⋅ Powered by WordPress

Privacy Policy