Turn the bolt (Item 1) [Figure 50-10-12] & [Figure 50-10-11] out of the clevis. Assembly: Apply Loctiteยฎ #518 adhesive to the bolt threads. Adjust the…
Category: BOBCAT S130
Assemble the parts as shown for the left side of the seat bar pivot assembly [Figure 50-10-7] & [Figure 50-10-8]. Seat Bar Mount (Item 1)…
Raise the seat bar (Item 1) [Figure 50-10-1]. Disconnect the seat bar sensor (Item 1) [Figure 50-10-2] from the cab harness. Lower the seat bar.…
Raise the loader lift arms and install an approved lift arm support device. (See Installing on Page 10-20-1.) Raise the loader operator cab. (See Raising…
Raise the loader lift arms and install an approved lift arm support device. (See Installing on Page 10-20-1.) Raise the loader operator cab. (See Raising…
Raise the loader lift arms and install an approved lift arm support device. (See Installing on Page 10-20-1.) Raise the loader operator cab. (See Raising…
Raise the loader lift arms and install an approved lift arm support device.(See Installing on Page 10-20-1.) Lift and block the loader. (See Procedure on…
The tools listed are needed for the following procedure: MEL1242 – Power Ram MEL1202B – Axle Bearing Service Set NOTE: The procedure shown is for…
The tools listed are needed for the following procedure: Axle Hub Puller Tool MEL1399 – Seal Driver Tool MEL1242 – Power Ram (may be used…
The drive components consist of the chaincase, drive chains, sprockets, axleshafts, hubs and a brake. The chaincase is partially filled with hydraulic fluid to lubricate…