Use Sensor Testers (MEL1428) and seat bar sensor tester adapter (MEL1567) for the following procedure: Connect the seat bar sensor tester adapter MEL1567 to the…

Remove the seat bar (Item 1) [Figure 60-110-5] from the loader. (See Removal And Installation on Page 50-10-1.) Remove the mounting bolt (Item 1) from…

. Use Sensor Tester (MEL1428) and seat bar sensor tester adapter (MEL1567) for the following procedure: Connect the seat bar adapter sensor leads (MEL1567) to…

The following troubleshooting chart is provided for assistance in locating and correcting BICS system problems. It is recommended that these procedures be done by authorized…

The following chart shows the effects which can happen to the loader, and the probable causes when the BICS Instrument Panel lights are off. See…

The following troubleshooting guide is provided for assistance in locating and correcting BICS system problems. It is recommended that these procedures be done by authorized…

9. Sit in operator’s seat and fasten seat belt. Lower seat bar, start engine and press the PRESS TO OPERATE LOADER button. 10. Raise lift…

8. Raise the lift arms 6 feet (2 meters) off the ground. Stop engine. Turn lift arm bypass control knob clockwise 1/4 turn. Pull up…

6. Fasten seat belt, disengage parking brake, press the PRESS TO OPERATE LOADER button and raise seat bar fully. Move steering levers slowly forward and…

4. Sit in operator’s seat, lower seat bar, engage parking brake and fasten seat belt. 5. Start engine and operate at low idle. Press the…