3. Sit in operator’s seat, lower seat bar, and press the PRESS TO OPERATE LOADER button. Press the auxiliary hydraulics FLOW button. The auxiliary FLOW…
Author: Jack
1. Sit in operator’s seat. Turn key ON. (Key Switch Panel), press RUN/ENTER button (Keyless Panel), lower seat bar and disengage parking brake. Press the…
The Bobcat Interlock Control System is an electronic system that is used to protect the operator. The system consists of the traction lock, seat bar…
Press and hold the LIGHTS button (Item 1) for two seconds to view SERVICE CODES in the HOURMETER/ CODE DISPLAY (Item 2) [Figure 60-90-1]. If…
Raise the lift arms and install an approved lift arm support device. (See Installing on Page 10-20-1.) Raise the operator cab. (See Raising on Page…
The tools listed will be needed to do the following procedure: MEL1609-Wheel Speed Sensor Test Harness [Figure 60-80-2] MEL1563 or 6689779-Remote Start Tool Multimeter Raise…
On SJC equipped loaders, the speed sensor [Figure 60-80-1] is used by the loader’s controllers to sense if the drive motor is rotating. The end…
Raise the lift arms and install an approved lift arm support device. (See Installing on Page 10-20-1.) Raise the operator cab. (See Raising on Page…