Tilt the Bob-Tach forward, so it is parallel to the floor [Figure 20-22-1].
Disconnect the hose (Item 1) [Figure 20-22-1] from the power Bob-Tach cylinder base end port.
Install a plug in the hose (Item 1) [Figure 20-22-2] and tighten.
Engage the parking brake. Lower the seat bar. Start the engine.
Push and hold the BOB-TACH โWEDGES UPโ Switch (Front Accessory Panel).
If there is any leakage from the base end cylinder port (Item 2) [Figure 20-22-2], remove the lift cylinder for
repair.
