Remove the two bolts (Item 1) [Figure 60-130-28] from the end of the foot sensor.
Installation: Tighten the bolts to 90 in.-lb. (10,2 Nโขm) torque. Apply Loctiteยฎ 242 to the threads.
Remove the boot retainer (Item 1), boot (Item 2), spool stop plate (Item 3), O-ring (Item 4) [Figure 60-130-29].
NOTE: Do not disassemble the sensor assembly (Item 5) [Figure 60-130-29]. The sensor assembly is a calibrated assembly and cannot be serviced. Order through Bobcat Parts.
