Remove the filter (Item 1) [Figure 20-70-4].
Remove the temperature sender (Item 1) [Figure 20-70-5] from the filter block.
Assembly: Apply thread sealer to the threads of the temperature sender before installing.
Remove the charge pressure sender (Item 1) [Figure 20-70-6] from the filter block.
Install a new O-ring (Item 2) [Figure 20-70-6] on the charge pressure sender.
Remove the plug (Item 1) [Figure 20-70-7] from the filter block.
Remove the O-ring (Item 1) [Figure 20-70-8] from the plug.
Remove the fitting (Item 1) [Figure 20-70-9] from the filter housing.
Remove the poppet (Item 1) and spring (Item 2) [Figure 20-70-10] from the filter housing.
