โข Dimensions are given for loader equipped with standard tires and dirt bucket and may vary with other bucket types. All dimensions are shown in…
Category: BobCat 753
Remove the mount plate (Item 1) [Figure 80-80-5] from the heater valve bracket. Remove the two mounting bolts (Item 1) [Figure 80-80-6] from the heater…
Disconnect the loader wiring harness (Item 1) [Figure 80-80-1] from the heater valve. Remove the relay mounting screw (Item 2) [Figure 80-80-1] from the heater…
Remove the plastic wedge (Item 1) [Figure 80-70-14] & [Figure 80-70-15] from the center of the blower fan motor wiring connector. With a pointed screw…
Remove the eight mount bolts (Item 1) [Figure 80-70-6] from the blower wheel cover. Remove the blower wheel cover from the fan housings. Remove the…
Raise the lift arms and install an approved lift arm support device. (See Installing Lift Arm Support Device on Page 10-20-1.) Raise the operator cab.…
Raise the lift arms and install an approved lift arm support device. (See Installing Lift Arm Support Device on Page 10-20-1.) Raise the operator cab.…
Remove the six mount bolts (Item 1) [Figure 80-50-6] from the heater unit rear cover. Remove the rear cover from the unit. Reverse the disassembly…
Raise the lift arms and install an approved lift arm support device. (See Installing Lift Arm Support Device on Page 10-20-1.) Raise the operator cab.…