Remove the nut (Item 1) [Figure 40-50-1] from the key switch. Lower the switch into the console. Remove the screw (Item 1) [Figure 40-50-2]. Pull…

Remove the four nuts (Item 1) [Figure 40-40-1]. Remove the seat mount.  

Remove the nuts (Item 1) [Figure 40-40-1] and [Figure 40-40-2] and bolts from the cables. Remove the nuts (Item 1) [Figure 40-40-3] and [Figure 40-40-4]…

NOTE: The door and front windows are supplied as kits that include the glass, urethane adhesive, combo primer, glass cleaner and bumpers for correctly installing…

Remove the majority of the old urethane adhesive from the perimeter of the cab. Prime and paint any bare metal or scratches. Clean the metal…

Remove the majority of the old urethane adhesive from the perimeter of the cab. NOTE: Leave a thin film (0,79 mm (0.03 in) thick) of…

Use the following procedure to remove the glass from the cab and right side window assembly. Push a small diameter wire (Item 1) [Figure 40-30-22]…

Remove the window. Remove the wiper strip (Item 1) [Figure 40-30-21] from the window channel.  

Remove the window. Remove the weather strip (Item 1) [Figure 40-30-19] from the bottom channel of the window. Installation: Clean the bottom channel. Apply a…

NOTE: The rear sliding window must be removed before the front sliding window can be removed. Unlatch the front sliding window and slide the window…