Use the following procedure to tighten the flare fitting: Tighten the nut until it makes contact with the seat. Make a mark across the flats…
Replace any tube lines that are bent or flattened. They will restrict flow, which will slow hydraulic action and cause heat. Replace hoses which show…
Lubricate the O-ring before installing the fitting. Loosen the jam nut and install the fitting. Tighten the jam nut until the washer is tight against…
When the fitting is tightened, you can feel when the fitting is tight to eliminate leakage caused by under or over torqued fittings. Use vaseline…
NOTE: Use the torque value for the part having the lesser property class when a fastener and nut are used together but have a different…
The following table shows standard torque specifications for bolts with zinc phosphate coating. Bolts purchased from Melroe that have zinc phosphate coating are specified by…
If the standard size bearing cannot be employed due to excessive wear of the crankpin and crank journal use undersize or oversize bearings. For undersize…